Faculty of Mechanical Engineering

Selected research and development projects

  • Modelling of elasto-plastic damage accumulation and cracking problems of structural elements in the complex fatigue condition – project coordinator: prof. Andrzej Seweryn, DSc, PhD, Eng
  • Analytical and numerical modeling of the transient heat generation process in the frictional elements of the brake systems – project coordinator: prof. Oleksandr Jewtuszenko, DSc, PhD, Eng
  • Analysis of stress caused by contact pressure in a homogeneous body with a gradient coating – project coordinator: Adam Bajkowski, PhD, Eng
  • Analytical and numerical modeling of deformation and fracture of solids with notches – project coordinator: Andrzej Kazberuk, DSc, Phd, Eng
  • Micromechanical modeling of failure in fiber-reinforced polymer matrix composites – project coordinator: Marek Romanowicz, PhD, Eng
  • The dynamics of interaction of gas bubbles in the transient formation at the outlet nozzle immersed newtonian liquid – project coordinator: Tomasz Wyszkowski, MSc, Eng
  • Investigation of dynamics of interactions between bubbles departing from nozzles – project coordinator: Romuald Mosdorf, DSc, PhD, Eng
  • Tribological problems during the compaction of granular media as exemplified by sand-lime mixture – project coordinator: Bazyli Krupicz, DSc, PhD, Eng
  • Two-phase flow patterns in minichannel identification using the non-linear method of data analysis – project coordinator: Romuald Mosdorf, DSc, PhD, Eng
  • Analytical methods of fields temperature and thermal stress calculation in friction components of braking systems – project coordinator: Michał Kuciej, DSc, PhD, Eng
  • Methods of forecasting of damage materials with complex thermo-mechanical properties – project coordinator: prof. Roman Kulchytskyy, ScD, PhD
  • Mechanics problems of heterogeneous and anisotropic materials – leader: Dr. Michał Kuciej
  • Selected problems of thermomechanics for materials with temperature dependent properties – project coordinator: Dariusz M. Perkowski, PhD, Eng
  • The dynamics of liquid movement inside the nozzle during the bubbles departures – project coordinator: Paweł Dzienis, MSc, Eng
  • Properties of h-difference control systems of fractional order – project coordinator: Ewa Pawłuszewicz, DSc, PhD, Eng
  • Stationary, high-speed, electromechanical flywheel energy storage system. Design, analysis and implementation of active magnetic bearings (ordered project) – project coordinator: prof. Zdzisław Gosiewski, DSc, PhD, Eng
  • Autonomous, integrated reconnaissance system with autonomous micro aero vehicles – project coordinator: prof. Zdzisław Gosiewski, DSc, PhD, Eng
  • Networked reconnaissance and command supporting system with autonomous unmanned aerial vehicles for disasters in urban areas – project coordinator: prof. Zdzisław Gosiewski, DSc, PhD, Eng
  • Smart modelling and decision support systems for control and optimization of complex mechanical structures with active magnetic bearings – project coordinator: Adam Piłat, PhD, Eng
  • Leak detection methods including process control problems in transmission pipelines and water networks – project coordinator: Paweł Ostapkowicz, PhD, Eng
  • Mechatronic components for control, robotics and diagnostics purposes – project coordinator: prof. Zdzisław Gosiewski, DSc, PhD, Eng
  • Sensors and actuators for control, robotics and diagnostics purposes – project coordinator: prof. Zdzisław Gosiewski, DSc, PhD, Eng
  • Modern technologies for food and agriculture industry with reduction of greenhouse gases emission (consortial project leading by BUT, supported by European Regional Development Fund and National Operational Programme Innovative Economy) – project coordinator: prof. Dariusz Butrymowicz, DSc, PhD, Eng
  • Comprehensive technologies for vegetables cold storage (consortial project leading by BUT) – project coordinator: prof. Dariusz Butrymowicz, DSc, PhD, Eng
  • Design of set of three units of heat pumps of heating capacity from 80 kW to 300 kW (Sun Energy) – project coordinator: prof. Dariusz Butrymowicz, DSc, PhD, Eng
  • Modelling and experimental evaluation of low and thermal processes occurring in fruits and vegetables cold storage chamber – project coordinator: Mirosława Kołodziejczyk, PhD, Eng
  • Modelling and experimental investigations of one-phase ejectors in application to solar cooling systems – project coordinator: Jerzy Gagan, PhD, Eng
  • Investigations of reduction of throttling losses in compression refrigeration systems by means of application of two-phase ejector – project coordinator: prof. Dariusz Butrymowicz, DSc, PhD, Eng
  • Modern technologies in refrigeration, air-conditioning, and food processing engineering – project coordinator: prof. Teodor Skiepko, DSc, PhD, Eng
  • High-efficiency refrigeration and air-conditioning systems with low emission of greenhouse gases – project coordinator: prof. Teodor Skiepko, DSc, PhD, Eng
  • High-efficiency refrigeration and air-conditioning systems operating with pro-cological working fluids – project coordinator: prof. Teodor Skiepko, DSc, PhD, Eng
  • Measurement of quality of wet steam in mist flow – project coordinator: Jerzy Gagan, Phd, Eng
  • Application of powder metallurgy for development of a new implantation Ti-alloys – project coordinator: prof Jan R. Dąbrowski, DSc, PhD, Eng
  • Friction and wear investigations of bone fixation systems – project coordinator: prof. Jan R. Dąbrowski, DSc, PhD, Eng
  • The prognosis of bone adaptation processes resulting from therapeutic treatments – project coordinator: Szczepan Piszczatowski, DSc, PhD, Eng
  • Investigations of implant surface – bone tissue interactions – project coordinator: Jarosław Sidun DSc, PhD, Eng
  • Modern materials and technologies for technics and medicine – project coordinator: prof. Jan R. Dąbrowski, DSc, PhD, Eng
  • Fracturing of materials with the macroscopic heterogeneous structure – project coordinator: Krzysztof Molski, DSc, PhD, Eng
  • The construction of an electrical mini-generator taking under consideration the flow of the operating medium as the working environment – project coordinator: Roman Kaczynski, DSc, PhD, Eng
  • The coordinate measurement and the analysis of geometrical errors of complex surfaces – project coordinator: Malgorzata Poniatowska, DSc, PhD, Eng
  • Dynamics, durability and mechanical strength of mechanical structures – project coordinator: Jerzy Nachimowicz, DSc, PhD, Eng
  • Forming, processing and measurement techniques of technical objects – project coordinator: Roman Kaczynski, DSc, PhD, Eng
  • Durability and reliability analysis of mechanical structures in the process of operation – project coordinator: Jerzy Nachimowicz, DSc, PhD, Eng
× Our website service uses cookies to work correctly. For details, see our privacy policy.
I agree to the privacy policy and cookie policy.